RM-561
System Module
Pin
Signal name
1, 2
HS_ GND
3
HS_MIC
4
HS_EAR_R
5
HS_EAR_L
6
PLUG_DET
RF description
Receiver (RX)
An analogue signal is received by the phone's antenna. The signal is converted to a digital signal and is then
transferred further to the baseband (eg. to the earpiece).
The receiver functions are implemented in the RF ASIC.
Issue 1
Table 9 AV connector pins
Direction
-
Input
Output
Output
Input
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Description
Ground)
Microphone
Audio out
Audio out
Plug detection
Page 5 –13