Nokia 2700c-2 Service Manual page 81

Table of Contents

RM-561

BB Troubleshooting and Manual Tuning Guide

ii Update the phone MCU software to the latest available version.

If the new flash is empty and the phone cannot communicate with

iii Choose the product manually from File→Open Product , and click OK.

Wait for the phone type designator (e.g. "RM-1" ) to be displayed in the status bar.

iv Go to Flashing→SW Update and wait until

picture.

Product

is automatically set according to the phone support module which was opened manually,

but the flash files cannot be found because the correct data cannot be read from the phone

automatically.

Code

must be chosen manually, it determines the correct flash files to be used. Please choose the

correct product code (can be seen in the phone type label) from the dropdown list.

Flash Type

must be set to Phone as Manufactured.

To continue, click Start.

Progress bars and messages on the screen show actions during phone programming, please wait.

Issue 1

Phoenix reads the product data as shown in the following

COMPANY CONFIDENTIAL

Phoenix , reflash the phone.

Page 3 –37

Table of Contents

Chapters

Table of Contents

Rm-561