Nokia 2700c-2 Service Manual page 29

RM-561
Service Devices and Service Concepts
Issue 1
FS-108
• FS-108 is equipped with a clip interlock system
• provides standardised interface towards Control Unit
• provides RF connection using coupler
• multiplexing between USB and FBUS media, controlled by VUSB
PK-1
PK-1 is a hardware protection key with a USB interface. It has the same
functionality as the PKD-1 series dongle.
PK-1 is meant for use with a PC that does not have a series interface.
To use this USB dongle for security service functions please register
the dongle in the same way as the PKD-1 series dongle.
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-230
RJ-230 is a jig used for soldering and as a rework jig for the engine
module.
SB-6
The SB-6 test box is a generic device to perform Bluetooth bit error
rate testing and doing cordless FBUS connection via Bluetooth.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Flash adapter
Software protection
key
SW security device
Common jig
Bluetooth tester
Page 2 –9