General Setup Menu - Sony PCS-11 Operating Instructions Manual

On: Enables control of each other's
cameras.
Off: Disables control of the remote party's
camera.
T.120 Data
Selects whether you conduct a data
conference via the T.120 standard using
NetMeeting (only for the ISDN connection).
On: Enables conduct of the T.120 data
conference.
Off: Disables conduct of the T.120 data
conference.
For details on the T.120 data conference,
see "Conducting a Data Conference Using
NetMeeting – T.120 Data Conference" on
page 131.
H.239
Selects whether you use the dual video
presentation mode based on the H.239
standard.
On: Enables the dual video presentation
mode based on the H.239 standard.
Off: Disables the dual video presentation
mode based on the H.239 standard.

General Setup Menu

Page 1/4
General Setup
Page: 1/4
Terminal Name
PCS-11
Dual Monitor
Standby Mode
Standby Time
Time Display
Terminal Name
Input the terminal name (up to 30 characters)
to report when the system is connected to the
external multipoint videoconferencing
system.
Dual Monitor
When two monitors are connected to the
System, selects whether you use the dual
monitor mode.
On: Enables the dual monitor mode. Still
images are always displayed on the
second monitor.
Off: Disables the dual monitor mode. Still
images are always displayed on the first
monitor.
For details on the dual monitor mode, see
"Using Two Monitors — Dual Monitor" on
page 118.
Standby Mode
Sets whether the Communication Terminal
is set to standby mode if it is not operated for
a specified period of time.
On: Activates standby mode.
Off: Deactivates standby mode.
Standby Time
Specifies the time that the system remains on
before entering the standby mode. You can
specify a time between 1 and 99 minutes.
For details on standby mode, see "Standby
Mode Function" on page 23.
Time Display
Selects whether you display the elapsed time
on the monitor screen during the conference.
On: Displays the elapsed time.
Registering Local Information
ISDN
Off
On
30 minutes
On
Save Cancel
41