Connecting The External Mcu; Activating The Chair Control - Sony PCS-11 Operating Instructions Manual

Connecting the External MCU

Connecting the external MCU (Multipoint Control Unit) enables conduct of a
multipoint videoconference.

Activating the Chair Control

If the MCU for the ISDN connection is equipped with the chair control
function, the chair control can be activated for up to 99 terminals connected.
The chair control mode allows you to specify any terminal to display on the
monitor screen, to broadcast the specified picture to all the terminals, or to
broadcast the local picture to all the terminals.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu opens.
2
Use the V, v, B or b button to select "Chair Request" under "Broadcast
Mode".
Display Control
3
Press the PUSH ENTER button on the Remote Commander.
142
Connecting the External MCU
LAN or ISDN
MCU
Display Control
Near
Far
Camera
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
PCS-11/11P
ON LINE POWER LAN ALERT
Broadcast Mode Terminal
Chair
Request
1