To Clean And Protect Exterior Surfaces - Thermador PRD304EG Installation Manual

To Clean and Protect Exterior Surfaces

The stainless steel surfaces may be cleaned by wiping with a damp soapy cloth,
rinsing with clear water and drying with a soft cloth to avoid water marks. Any mild
glass cleaner will remove fingerprints and smears.
For discolorations or deposits that persist, refer to the Care and Use Manual.
To polish and protect the stainless steel, use a cleaner/polish such as Stainless
Steel Magic®.
DO NOT allow deposits to remain for long periods of time.
DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to
the surface causing rust.
DO NOT allow salt solutions, disinfectants, bleaches or cleaning compounds to
remain in contact with stainless steel for extended periods. Many of these com-
pounds contain chemicals which could prove harmful. Rinse with water after expo-
sure and wipe dry with a clean cloth.
Page 29