Nikon SB-10 Instruction Manual page 8

Nikon F2-series and F cameras
First, mount the Flash Un it Cou pier AS-' on
the camera's accessory shoe . Next, turn the
locking nut on the mounting foot of the 58-' 0
until it reaches the upper limit. Then slide the
mounting foot forward onto the accessory shoe
of the AS-' as far as it will go . Retighten the
locking nut to prevent the unit from acciden-
tally slipping off.
Nikon R 10 and R8 Super Zoom
First, plug the Sync Cord SC-7 into the sync
socket on the 58-' O. Next, turn the locking
nut on the mounting foot until it reaches the
upper limit . Slide the mounting foot forward
onto the camera's accessory shoe as far as it
will go. Then retighten the locking nut to pre-
vent the unit from accidentally slipping off.
I nsert the sync cord contact point into the
speedlight sync terminal
(7)
on the camera.
8