Ready-Light In T He Fe Camera Finder; Manual Override - Nikon SB-10 Instruction Manual

taken will be slightly underexposed . To prevent
this, open up the lens by a half-stop more, or
shoot several second s after the lam plights up .
However, perfect exposures can be made at all
times in automatic exposure operation, except
for the furthest distance range.
Ready-Light in the FE Camera Finder
The Nikon FE has a built-in ready-light in the
finder eyepiece, with which you can check
speedlight readiness without removing your eye
from the viewfinder. Slipping the mounting
foot of the SB-1 0 onto the camera's accessory
shoe connects the ready-light with the speed-
light.
MANUAL OVERRIDE
In addition to its use in the automatic mode,
your SB-lO can also be used manually . Switch-
ing the unit to manual sets the flash circuit to
full power for each exposure. Applications for
this include mUltiple flash shooting, or when
using GN-Nikkor lenses.
To set the unit on manual, slide the shooting
mode selector until the white indicator is ad-
jacent to 'M,' in between the two automatic
mode indicators.
17