Troubleshooting - Nikon COOLPIX 775 Quick Start Manual

Troubleshooting

If your camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon representative. Refer to the page
numbers listed in the rightmost column for infor mation on solving the problems
listed here.
Problem
Monitor is blank
No indicators appear
in monitor
Monitor is hard to
read
No photo is taken
when shutter-release
button is fully
pressed
Photos are too bright
(overexposed)
156
• Camera is off.
• Battery is not correctly inserted or battery-chamber cov-
er is not fully closed.
• Battery is exhausted.
• EH-21 AC adapter/batter y charger (available separately)
is not properly connected.
• Camera is in sleep mode. Press shutter-release button
halfway.
• Monitor is off. Press multi selector up to turn monitor on.
• PAL is selected in Video Mode menu and video cable is
connected.
• Indicators are hidden. In shooting mode, press multi se-
lector up until indicators are displayed. In playback mode,
press multi selector to left until indicators are displayed.
• Slide show is in progress.
• Monitor brightness requires adjustment.
• Monitor is dirty.
• Camera is in playback mode.
• Battery is exhausted.
• Number of exposures remaining is zero: not enough mem-
ory remaining.
• AF light flickers: camera unable to focus.
• Flash light flickers: flash is charging.
• Message "MEMORY C ARD IS NOT FORMATTED" ap-
pears in monitor: memory card is not formatted for use in
COOLPIX775.
• Message "NO MEMORY CARD" appears in monitor: no
memory card in camera.
• Exposure compensation is too high.
Possible Cause
55
34
39
—
52
10
139
51,
122
132
113
151
120
39
47
52
52
37
36
106