Philips 32HFL5662L/F7 Service Manual page 19

Figure 5-10 Update the TV software [4/5]
Figure 5-11 Update the TV software [5/5]
Note:
• Do not remove the USB flash drive during the software
update.
• If a power failure occurs during the update, do not remove
the USB flash drive from the TV. The TV will continue the
software update as soon as the power comes up again.
• If an error occurs during the update retry the procedure or
contact the dealer.
• We do not recommend downgrading to an older version.
• Once the upgrade is finished, use the PC to remove the TV
software from the USB portable memory.
5.3 Error Codes
The error code buffer contains all errors detected since the last
time the buffer was erased. The buffer is written from left to
right. When an error occurs that is not yet in the error code
buffer, it is displayed at the left side and all other errors shift one
position to the right.
Basically there are three kinds of error codes:
Error Code
000
011
012
013
Service Modes, Error Codes, and Fault Finding
18890_209_100920.eps
101018
18890_210_100920.eps
101018
Event
No problem
2
I C bus error
Tuner error
LCD panel
TPB1.1HU LA
5.4 Fault Finding and Repair Tips
5.4.1 Speakers
Make sure that the volume is set to minimum during
disconnecting the speakers in the ON-state of the TV. The
audio amplifier can be damaged by disconnecting the speakers
during ON-state of the set!
5. EN 19
2010-Nov-05