Parts Replacement - CYBEX 625T Service Manual

6. Turn the tube nut with your fingers until it measures the correct center to center length. This length
is measured from the center of the top hole to the center of the bottom hole.
7. Unplug the power cord from the power outlet.

Parts Replacement

Base Assembly
End Caps
Tools Required:
• Phillips screwdriver
Remove end caps
1. Remove two screws securing right end cap using a Phillips screwdriver.
2. Repeat step for left end cap.
Cybex 625T Treadmill Part Number
Item
Page 104 of 209
Description
Center to center
1
length
2 Tube Nut
Item Description
1 Screws
2 Right end cap
Qty.
11.75" (29.8
cm)
1
Qty.
2
1