Advertisement
Empty the Dirt Collection Tank
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
The dirt collection tank should be
emptied before debris reaches the
FULL line. Turn power OFF.
3
Grasp filter tabs and pull vertically to
remove filter cup and empty dirt into
waste container.
Cleaning or Replacing the Brush Roll
1
Turn power OFF and detach motorized
brush if attached OR turn unit over to
access the brush roll.
3
Then simply lift the brush out of the
foot and clean off hair or other debris
from brush roll.
8
www.BISSELL.com
2
Hold the hand vacuum vertically and
depress release button on the front to
release the dirt collection tank.
4
Replace filter back into the dirt cup
and attach dirt cup to hand vacuum
until it snaps securely into place.
2
Use a coin to remove the brush roll,
turning counter clockwise to unlock.
4
Place the cleaned brush roll back into
the foot of unit and use coin to turn
lock clockwise to lock into place.
Advertisement
