Advertisement
Cleaning or Replacing the FIlter
WARNING
Do not operate vacuum with damp or wet filters or without all filters in place.
1
Turn power OFF and remove the dirt
cup as directed in "Empty the dirt cup"
section.
3
Tap firmly against the inside of a waste
container, removing any visible dirt.
NOTE: After heavy usage, you may clean the filter and filter cup by washing it
gently by hand in warm water and mild dish detergent. Rinse thoroughly and
make certain it is completely dry before replacing it.
2
Grasp filter tabs and lift up to remove
the washable filter cup from the
dirt cup. Grip the filter cup and turn
counterclockwise and lift down to
remove filter from filter cup.
4
Replace filter back into the filter cup
then turn clockwise to lock into place.
Attach filter cup back into the dirt cup
and attach to hand vacuum until it
snaps securely in place.
www.BISSELL.com
9
Advertisement
