Wheel Mounting Nuts (Lug Nuts) - Winnebago Vita 2020 Manual

Check your tires for proper inflation before
each trip and at least once a month with an
accurate tire gauge. See "Valve Stem Access" in
Section 3 - Driving Your Motorhome.
Swing-Down Carrier
CAUTION
Do not lie beneath tire carrier while
removing tire. The tire can fall and injury
can occur.
• Support tire carrier with blocks or a jack.
• Loosen knob on each side of tire carrier and
swing hanger away from carrier.
• Lower tire carrier to ground and remove tire.
Recovery Towing
When calling a professional towing service,
we recommend that you advise them of your
motorhome length and approximate front axle
weight listed on your Vehicle Certification
Label. This will allow the towing operator to
determine the proper towing equipment to use.
Winnebago Industries
responsibility for damage incurred while towing
this vehicle.
NOTE: Consult your chassis manual for towing
instructions or precautions provided by
the chassis manufacturer.
NOTICE
Do not lift on bumper. Damage will result
to front end body parts.
®
does not assume
SECTION 2 –
SAFETY AND PRECAUTIONS
WARNING
Stay out from beneath the motorhome
while it is suspended by the towing
assembly. Do not allow passengers to
occupy a towed vehicle. Death or serious
injury can result.
WHEEL MOUNTING NUTS
(LUG NUTS)
The mounting bolts and nuts for the standard
steel wheels are designed specifically for the type
of wheel.
Steel Wheels
• The lug nut for steel wheels is a non-plated,
hat-shaped, flange nut. The accompanying
dome-shaped, split cone washer should be
positioned "dome first" onto the wheel stud
before the nut as shown.
Steel Wheel Front
Steel Wheel Lug Nut and Washer
(Hex Flange Nut with Split Cone Washer)
Steel Wheel Rear
2-11