Dtmf Code Transmit And Enquiry; Keypad Lock - Alinco PH3DJ-500 Instruction Manual

SHORTCUT OPERATIONS
3. Press [PF1], [PF2] or
NOTE: During timing, press

DTMF code Transmit and Enquiry

1. Press key, the top left corner of LCD displays "
data and group number (total 16groups) of current group.
2. Rotate channel switch to choose desired group and DTMF data, press PTT key
to transmit selected DTMF signaling. If current group not edit DTMF data, LCD
displays "EMPTY".
3. When current group displays "EMPTY", press
displays " " icon, press and hold
transceiver enters into DTMF edit state, LCD displays "___________", now you
can enter desired DTMF data by keypad.
4. When finished editing, press side key [PF2] to save DTMF signaling.

Keypad lock

In order to prevent wrong operation, user can make use of keypad lock function.
Under standby state, press
key until transceiver emits "DU" beep, LCD displays "
Repeat above operation, "
25
key to exit stop watch function.
key to stop timing and displays current data, press this key again to clear timer.
key until transceiver emits "DU" beep,
key, the top left corner of LCD displays "
" icon disappears, key lock function is cancelled.
" icon, then press
key, the top left corner of LCD
" icon, keypad is locked.
key, LCD displays DTMF
" icon, then press and hold