Frequency Reverse; Tx Power Selection; Dtmf Code Transmit And Enquiry - Alinco DJ-CRX7 Instruction Manual

BASIC OPERATIONS

Frequency Reverse

Under standby state, press
the current channel as frequency reverse, repeat above operation to turn off frequency reverse.
1. When LCD displays "R" icon, it means current channel enabled the frequency
reverse function, the TX frequency and RX frequency is interchanged, if CTCSS/
DCS signaling is set, it will also interchange.
2. When "R" icon disappears, it means reverse function is close.

TX Power Selection

Under standby state, press
press key to choose High/Low power for current channel.
1. When LCD displays "L" icon, it means low power is chosen.
2. When LCD displays "M" icon, it means Middle power is chosen.
3. When high power is selected the radio screen will not display "L" or "M".

DTMF code Transmit and Enquiry

1. Press key, the top corner of LCD displays "
data and group number (total 16 groups) of current group.
2. Press /
transmit selected DTMF signaling. If current group does not contain DTMF data,
LCD displays the current group number and "EMPTY".
19
key, the top corner of LCD displays "
key, the top corner of LCD displays "
to choose desired group and DTMF data, press [PTT] key to
" icon, then press
" icon, then
" icon, then press
key to set
key, LCD displays DTMF