Frequency Reverse; Tx Power Selection; Dtmf Code Transmit And Enquiry - Alinco DJ-CRX5 Instruction Manual

BASIC OPERATIONS

Frequency Reverse

Under standby state, press
set the current channel as frequency reverse, repeat above operation to turn off frequency reverse.
1. When LCD displays "R" icon, it means current channel open the frequency reverse
function, the TX frequency and RX frequency is interchanged, if CTCSS/DCS
signaling is set, it will also interchange.
2. When "R" icon disappears, it means reverse function is close.

TX Power selection

Under standby state, press
then press key to choose High/Low power for current channel.
9
1. When LCD displays "L" icon, it means low power is chose.
2. When LCD displays "H" icon, it means high power is chose.
3.When LCD displays "M" icon, it means Middle power is chose.

DTMF code Transmit and Enquiry

1. Press key, the top left corner of LCD displays "
A
data and group number (total 16 groups) of current group.
2. Press to choose desired group and DTMF data, press [PTT] key to transmit
/
B C
selected DTMF signaling. If current group not edit DTMF data, LCD displays the
current group number and "EMPTY".
19
key, the top left corner of LCD displays "
A
key, the top left corner of LCD displays "
A
" icon, then press
" icon,
" icon, then press
0
DTMF
key to
7
key, LCD displays DTMF