System board
System board connectors
The following image shows the different connectors on the system board.
1. Fan connector
2. IO board FFC connector
3. eDP connector
4. DC-in port connector
5. Keyboard FFC connector
6. Backlit FFC connector
7. Memory module connectors
8. Battery connector
9. Touchpad FFC connector
10. Hard-drive FFC connector
11. WLAN connector
12. Speaker cable connector
13. SSD connector
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
M.2 2230 solid-state
6. Remove the
M.2 2280 solid-state
7. Remove the
memory
modules.
8. Remove the fan.
9. Remove the
heat
sink.
70
Removing and installing components
Before working inside your
drive.
drive.
computer.