BenQ CinePrime HT3560 User Manual page 30

Audio
A variety of sound modes enables user to select and adjust the best mode that
Sound Mode
matches current environment.
Select desired frequency bands (100 Hz, 300 Hz,1k Hz, 4k Hz, and 10k Hz) to
User Sound
adjust the levels according to your preference. The settings made here define the
EQ
User mode.
Selects audio output from internal or external speakers.
• treVolo: Audio output to internal speakers.
• S/PDIF: Audio output to external speaker via S/PDIF and mute internal speakers.
Audio Output
• Audio Return+: Turns on Audio Return(+) function and changes audio output
from internal speakers to ARC/eARC soundbar via HDMI-2.
• 3.5mm Jack: Audio out to external speaker via 3.5mm Jack and mute internal
speakers.
Selects audio format (LPCM, RAW, RAW+) from source device connected to
Audio Output
HDMI-1 / HDMI-3 and pass them to external device via S/PDIF or ARC/eARC
Format
(HDMI-2) of projector.
Mute
Temporarily turns off the sound.
Volume Adjusts the sound level.
L/R Switch
Switch the left/right audio channels.
Power On/Off Turns on or off the ring tone when the projector is in startup and shutdown
process.
Ring Tone
All of the adjustments you've done for the Audio menu return to the factory preset
Reset Audio
values.
30 Menu operation