BenQ CinePrime HT3560 User Manual page 33

Installation
Projector
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Position
2D Keystone
See
Adjusts the image size and focus and check that the
projected image is free from distortion.
Test Pattern
We recommend you use the High Altitude Mode when your environment is
between 1500 m –3000 m above sea level, and ambient temperature is between
0°C–30°C.
Operation under "High Altitude Mode" may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
High Altitude
may display auto shut-down symptoms, which is designed to protect your projector
Mode
from over-heating. In cases like this, you should switch to High Altitude mode to
solve these symptoms. However, this is not to state that this projector can operate
under any and all harsh or extreme conditions.
• Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on
under such a condition.
There are two 12V triggers that work independently according to your needs for
installation scenarios.
• On: If this is selected, the projector will send electronic signal out when it is
12V Trigger
turned on.
• Off: If this is selected, the projector will not send electronic signal out when it is
turned on.
Select a baud rate that is identical with your computer's so that you can connect the
Baud Rate projector with a suitable RS-232 cable and update or download the projector's
firmware. This function is intended for qualified service personnel.
Choosing a location on page
Correcting keystone on page 15
11.
for details.
Menu operation 33