BenQ CinePrime HT3560 User Manual page 42

Indicators
Light
: Off
42 Maintenance
System events
Burn-In events
Thermal events
: Orange On
: Orange Flashing
Status & Description
System is in stand-by mode
System is powering up
System is under normal operation
System is cooling down
Downloading
Colorwheel start fail
Scaler reset fail
Lamp life exhausted
Burn-in on
Burn-in off
Lamp events
Lamp error in normal operation
Lamp is not lit up
Fan 1 error (the actual fan speed is outside the desired speed)
Fan 2 error (the actual fan speed is outside the desired speed)
Fan 3 error (the actual fan speed is outside the desired speed)
Fan 4 error (the actual fan speed is outside the desired speed)
Temperature 1 error (over limited temperature)
: Green On
: Green Flashing
: Red On
: Red Flashing