Package Contents - Cisco Meraki CW9163E Installation Manual

Table of Contents

Advertisement

MA-INJ-4 [30 W rated single-port PoE injector]
MA-INJ-6 [60 W rated PoE injector (802.3bt), mGig Ethernet]
AIR-PWRINJ-60RGDMG [37 W rated power injector]
Note: Actual power consumption may vary depending on the AP usage.
Note: The power injector provides DC voltage to the AP over the Ethernet cable and supports a total end-to-end Ethernet cable length of 100 m (328
ft) from the switch to the AP
Environment
IP67 Environmental rating
Up to 100/165 mph wind (sustained/gust)
Operating temperature:
-40° to +65° C
Security
Four security screws
Two mounting straps
Supports secure boot

Package Contents

The CW9163E package contains the following:
Quick install guide
Regulatory compliance and safety information
CW9163E Cloud-Managed Access Point
Mount Plate, MA-MNT-MR-16
Support bracket
Grounding cable
Gift Box
Mounting straps
Ground lug
RJ-45 Field termination gland
Waterproof cap
Antenna tape
2

Advertisement

Table of Contents
loading

Table of Contents