Using The Kvm Switch - TRENDnet TK-408K Quick Installation Manual

4-port ps/2 audio kvm switch kit

Hide thumbs Also See for TK-408K:

3. Using the KVM Switch

To alternate between computers, you can use the Push Buttons on the KVM

Switch or the Hot-key commands via keyboard.

Hot-Key Commands

A keyboard hot-key command consists of three keystrokes:

Hot-Key command = ScrLk + ScrLk + Command key(s)

After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.

You then have another 2 seconds to press a command key. If you do not press

a key within 2 seconds, the switch will exit hot-key mode.

NOTE

1. Hotkey command works on top row numbers keys only.

2. When the binding of PC & Audio/Mic port switching is enabled by the hotkey

sequence, any PC and Audio/Mic switching are bound together.

3. For non-PnP OS(Linux, Windows NT 4.0), please use the following

commands to reset the mouse setting:

2-key mouse setting:

3-key wheel mouse setting:

5-key wheel mouse setting:

Hot-Key convention: The hotkey notation, denotes that you should hit the

individual key consecutively one at a time, not simultaneously.

ScrLk

English

Table of Contents