Table of Contents
Advertisement
Operate the KVM Switch
Hardware Installation
1. Connects
microphone/speakers (optional) to your KVM Switch
Connects one set of USB/DVI/Microphone/Speaker cable to 1
2.
computer
USB/DVI/Microphone/Speaker to the 2
connected the KVM and the computer properly, the KVM Switch
is ready to use.
NOTE:
Some computers with USB interface may require you to
manually enable the USB option in the BIOS setting before
using any USB device. If your USB interface does not
work, please check the USB Status option in BIOS.
If you are using the Windows 98(SE) and have not
installed a USB mouse yet, it is highly recommend that you
connect the USB mouse directly to computer first before it
connects to KVM Switch.
KVM Switch Operation
There are three methods to select the computers
(1) One-touch push button switch
(2) Keyboards hot key commands
(3) KVM Switcher Software
the
shared
and
connect
USB
keyboard,
another
nd
computer. After you have
- 5 -
mouse,
monitor,
set
st
of
Advertisement
Table of Contents
