Operate The Kvm Switch; Face-Panel Button; Keyboard Hotkeys - TRENDnet TK-207K Software Manual

Operate the KVM Switch

There are three methods to control your KVM Switch for PCs.
(1) face-panel push button
(2) hotkey sequence
(3) KVM Client Switching Software

Face-panel button

The face-panel button allows you a direct control over KVM
switching operation. Simply press the button to switch to the
corresponding PC port.
You can use the face-panel button to switch to an empty port that is
not connected with any computer. Normally, if you use keyboard
hotkeys or the KVM Switching software, you will not be able to
switch to an empty port.

Keyboard hotkeys

User-definable hotkeys for PC selection:
Hotkey sequence = Ctrl + Alt + [command key]*
Universal hotkey for PC toggle-switching:
* Please refer to next section for keys that are qualified to be used as
a command key
- 9 -