Troubleshooting - TRENDnet TK-408K Quick Installation Manual
4-port ps/2 audio kvm switch kit
Hide thumbs
Also See for TK-408K:
- Guía de instalación rápida (11 pages) ,
- Quick installation manual (4 pages) ,
- Specifications (3 pages)
Advertisement
Troubleshooting
Q1:
Where is the power supply? I did not find one in the box.
A1:
The TK-408K does not require a power adapter. It draws power from your
computer's PS/2 connections. As long as your KVM Switch is connected to the
PS/2 port, it will receive the necessary power to function.
Q2:
I have the KVM switch connected properly, but my keyboard and mouse don't
work.
A2:
Please make sure your PS/2 port is working properly by testing it with your
other PS/2 devices. Once you confirm that the PS/2 port is functional, please
reboot your computers, and try to use the KVM switch again.
Q3:
Can I connect and disconnect the PS/2 cables while the computers are turned
on?
A3:
Do not try to connect the KVM Switch to the computers while the computers
are in powered-on state, because the computers may have difficulty recognizing
your shared PS/2 keyboard and PS/2 mouse.
Q4:
Will the KVM switch remember the keyboard settings between computers?
A4:
Yes, the KVM switch will remember the keyboard settings when switching
between your computers. (i.e.: Cap lock, Num key, etc.)
Q5:
How do I switch from one computer to another with the KVM switch?
A5:
You may switch between computers by pressing the Push Buttons on the KVM
switch or by using the Hot-Key commands via keyboard. For a list of Hot-Key
commands, refer to the "Quick Reference Sheet for TK-408K".
If you still encounter problems or have any questions regarding the TK-408K, please
contact TRENDnet's Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
6
Advertisement
