2. How to Connect Note: The TK-208/TK-408 KVM Switch does not require any drivers or software. 1. Turn off both computers and their peripherals, and disconnect all power cords. Connect the shared keyboard, monitor, mouse, microphone (optional) and speaker (optional) to the KVM Switch's console 3.
Page 5
Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: Thank you for choosing TRENDnet PC 2 (TK-208) PC2, PC 3, PC4 (TK-408) www.TRENDnet.com/register...
3. Operation Note: For PC switching, you can use the face-panel buttons of the KVM Switch, or a Hot-Key command sequence via keyboard. Face-Panel Buttons Press the corresponding face-panel button to select your PC. Hot-Key Command Sequence After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
Page 7
Quick Reference Sheet for TK-208/TK-408 Hot-Keys Command ScrLk Select PC x = 1 ~ 2 for PC channel number ScrLk Select Audio/Mic Channel (Fx is a function key) FX = F1~F4 Bind PC & Audio/Mic ScrLk Source UnBind PC & Audio/ ScrLk Mic Switching ScrLk...
You can switch computers by pressing the Push Buttons on the KVM switch, or by using the "Hot-Key” commands. Refer to Section 3 Operation for more information. If you still encounter problems or have any questions regarding the TK-208K/TK-408K, please contact TRENDnet's Technical Support Department.
Page 9
TK-208K/TK-408K - 2-Year Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product.
Page 10
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDnet'S PRODUCTS. TRENDnet SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY...
Page 11
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.