Introduction Thank you for purchasing KVM switch. KVM switch can save your MONEY, TIME, SPACE, EQUIPMENT and POWER. You can control multiple PCs from a single Keyboard, Mouse and VGA monitor. KVM switch is loaded with features such as 19" Rack Mount Size, Hot key Control, Front Panel Push Button and Auto Scan Control.
Package Contents Model No.: TK-401R Model No.: TK-401R 4 port KVM Switch 1 pcs 1 pcs User's Guide AC to DC Power Adapter optional Rack Mount Kit optional Model No.: TK-801R Model No.: TK-801R 1 pcs 8 port KVM Switch...
Console side Console side One VGA Monitor 4 HDB 15 pin male to male VGA cables 4 PS/2 cable male to male for Keyboard TK-401R TK-401R One PS/2 Keyboard 4 PS/2 cables male to male for Mouse One PS/2 Mouse...
Product Details Front Panel & Rear Panel of TK-401R: Front Panel & Rear Panel of TK-401R: Front Panel & Rear Panel of TK-801R: Front Panel & Rear Panel of TK-801R: Front Panel & Rear Panel of TK-1601R: Front Panel & Rear Panel of TK-1601R:...
Hardware Installation Before installation, please make sure all of peripherals and computers have been turned off. 1.Install the Switch in a fairly cool and dry place; see the Technical Specifications section for the acceptable operating temperature and humidity ranges. The installation site must be free from strong electromagnetic field generators, vibration, dust, and direct exposure to sunlight.
Usage The Push Buttons: Pressing the button to change the ports. TK-801R (8 Port) PC's POWER PC ON LINE (RED) LED (GREEN) LED TK-801R TK-801R RE D- ON LIN E GR EE N -SELECT PUSH LED Indication: Red LED light - KVM cable is connected and PC power support KVM switch.
Page 9
Below are the available "Hot-Key" commands: Within 2 seconds Scroll Scroll Scroll Scroll Previous Port Lock Lock Lock Lock Scroll Scroll Scroll Scroll Next Port Lock Lock Lock Lock (Note: You can also press up arrow key or down arrow key longer time to speed up selecting the destination port) To select specific PC port: Port No.
Troubleshooting Ensure that all cables are well seated. Label all of cables with the number for each respective computer to avoid confusion. 1.The Power Jack polarity is center positive and you can use power adapter with DC12V, 1A or DC9V , 1A output. 2.Don't press any keys on the keyboard while the selected computer is booting up.
Certifications This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.