Connecting To The Mains Supply; Putting Battery In The Remote Control - Grundig Cosmopolit 4 WEB DAB+ Manual

CONNECTION­AND­PREPARATION
Connecting­to­the­mains­supply
Notes:
Check that the mains voltage on the type
T
plate (on the back of the power adapter)
corresponds to your local mains supply. If
this is not the case, contact your specialist
dealer.
Before connecting the power adapter plug
T
to the wall socket, ensure that all other con-
nections have been made.
1 Insert the plug of the supplied power adapter
cable into the »DC­IN« socket on the back of
the device.
2 Plug the power adapter into the wall socket.
Caution:
The device is connected to the mains with the
T
power adapter. Pull out the power adapter
plug if you want to completely disconnect
the device from the mains.
Make sure that the power adapter plug is
T
easily accessible during operation and not
hindered by other objects.
14­
ENGLISH
Putting­battery­in­the­remote­
control
1 Open the battery lid by pressing on the arrow
and sliding the lid out.
2 Insert two batteries (2 x 1.5 V, R 03 /UM 4/
AAA) into the battery compartment with the
correct polarity.
3 Close the lid of the battery compartment.
Notes:
Do not expose the batteries to extreme heat,
T
caused for example by direct sunlight, heat-
ers or fire.
Remove the batteries when they are flat or
T
when you know that the device will not be
used for a long period of time.
Environmental­note:
Batteries, including those which do not con-
T
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
­---------------------------------------