Dab+ rechargeable & solar digital radio (30 pages)
Summary of Contents for Grundig TRAVELLER II PE
Page 1
TRAVELLER II PE OWNER’S MANUAL HOW TO USE YOUR GRUNDIG TRIIPE AM/FM/SW Radio NEED HELP? HERE’S HOW TO CONTACT US: • From the United States: 1-800-872-2228 • From Canada: 1-800-637-1648 • From everywhere else: 650-903-3866 • e-mail: grundig@ix.netcom.com • World Wide Web: www.grundigradio.com...
Controls... 4 Power Supply... 6 Setting the Time... 7 Home Time... 7 World Time ... 7 Select the World Time... 7 Radio Operation... 8 Switching on ... 8 Selecting the wave band... 8 Tuning-in a station... 8 Volume ... 8 Switching off ...
Controls Power Function Switch Switch to this position to TURN the radio OFF. Switch to this position to have the radio POWER ON If you locate this switch in the HWS (SNZ) position, the unit buzzies at alarm time you have preset and continue with HWS system.
Page 5
World Time Selecting switch Turn the pointer towards the name of the c with the same longitude as the place you v to locate, then you can easily get it's present time shown on the display as WORLD TIM Time Set switch LOCK When any timing has been properly adjust put the switch in this position to lock it to prevent accidental...
Power Supply a) Battery operation - Open the battery compartment lid (14) by pushing in the lock of the lid and lift it off. - Insert one >AA< size battery for CLOCK movement and 2 >AA> size batteries for RADIO into the battery compartment. The batteries must be installed in position with polarity as indicated in the battery compartment.
Setting the Time Home Time - Set the TIME SET switch (9) to HOME position. - Press the triple function key (2) to select 12-hour AM/PM or 24 hour display mode. -Use >H< (13) and >M< (11) TIME ADJUSTOR for your home time on the MAIN TIME display (3A).
Radio Operation Switching on Slide switch POWER FUNCTION (1) to position ON. The TUNING indicator (3c) will be lighted Selecting the wave band Slide the BAND SELECTING switch (5) to the desired wave band. Position FM 87.5 - 108 MHz MW 520 - 1620 kHz SW1 49 m band (5.80 - 6.20 MHz) SW2 41 m band (7.10 - 7.50 MHz)
Alarm Operation Setting the alarm time - Set the TIME SET switch (9) to ALARM position. The actual time indication is faded out. - Press button HOUR (13) until the alarm hour is reached. For exact time, press button MINUTE (11) until the correct alarm time is shown. - Set the TIME SET switch (9) back to LOCK position.
Precautions Do not expose the set to direct sun radiation. Especially in cars it may suffer from excessive heat during the hot summer months. Do not position the set in the direct vicinity of radiators and protect if from humidity. Proper operation is ensured between 0 and 40 Only use a piece of soft cloth and a mild detergent solution for cleaning, but never...