Charging The Dog Collar Device; Turning On The Devices - Garmin Astro 320 DC 50 Quick Start Manual

3
Replace the battery cover, and turn
the D-ring clockwise.
4
Hold .
5
Select Setup > System > Battery
Type.
6
Select Alkaline, Lithium, or
Rechargeable NiMH.

Charging the Dog Collar Device

NOTICE
To prevent corrosion, thoroughly dry the
contacts on the collar and the surrounding
area before connecting the charging clip.
You should fully charge the battery before
you use the device for the first time.
Charging a fully depleted battery takes
about five hours. The device will not
charge when outside the temperature
range of 32° to 113°F (0° to 45°C).
1
Snap the charging clip
device .
2
Plug the power cable into a power
source.
The status LED is solid red when the
collar is charging.
3
After the status LED turns solid green,
remove the charging clip from the
collar.

Turning On the Devices

• On the handheld device, hold the
power key until the LCD display turns
on.
• On the dog collar device, hold the
power key until the status LED flashes
and the collar beeps.
onto the
5