Toro 72542TE Operator's Manual page 36

Grandstand mower with 122cm rear discharge turbo force cutting unit
Table of Contents

Advertisement

Figure 51
Changing the Engine Oil
Service Interval: After the first 8 hours
Every 100 hours
Note:
Dispose of the used oil at a recycling center.
1.
Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil
g273859
drains completely.
2.
Disengage the PTO, move the motion-control
levers to the N
engage the parking brake.
3.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4.
Change the engine oil as shown in
g307458
5.
Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
53).
36
-
position, and
EUTRAL
LOCK
Figure
Figure 52
52.
g273859
g031447
(Figure

Advertisement

Table of Contents
loading

Table of Contents