Closing The Engine Guard And Guard Extension - Toro 72542TE Operator's Manual

3. Remove the 2 bolts (5/16 x 1 inch) and belt
guard (Figure 31).
Figure 31
1. Bolt—5/16 x 1 inch (2)
4. Remove the hex nut (5/16 inch) nut (5/16 inch)
securing the guard extension to the carriage
bolts (Figure 32). Remove the guard extension.
Figure 32
1. Hex nut (5/16 inch)
2. Guard extension
g279540
2. Belt guard
g279541
3. Nut (5/16)
4. Carriage bolt (5/16 x 4
inches)
Closing the Engine Guard
and Guard Extension
1. Install the extension guard as shown in
32. Torque the nuts to 20 to 25 N∙m (15 to 18
ft-lb).
2. Install the belt guard as shown in
Torque the bolts to 20 to 25 N∙m (15 to 18 ft-lb).
3. Rotate the engine guard back as shown in
Figure 33.
4. Secure the engine guard to the extension guard
using the bolt and shoulder nut as shown in
Figure 29.
27
Figure
Figure 33
Figure
31.
g279543