Epson TM-C3400BK Technical Reference Manual page 42

Paper type
Form
Backing paper width
Label width
Label length
Gap between labels
Edge cutoff on left/right side
Edge cutoff width
Label edge R
Black mark width
Black mark length
Black mark centering position
Black mark interval
Paper thickness
Roll paper core
External diameter
Winding direction
 Do not use the paper with a hole or cutout.
 when using this type of paper, the label end and the black mark end of the black mark posi-
42
Synthetic Media Label
Roll paper
30 to 112 mm {1.18 to 4.41"}
25.4 to 108 mm {1.0 to 4.25"}
When removing right and left fringes only:
15 to 1117.6 mm {0.59" to 44.0"}
3 to 6 mm {0.12 to 0.24"}
2  0.5 mm {0.079  0.02"}
1.5 mm {0.059"} or more
2 mm or less {0.079"}
13 mm {0.51"} or more
5 mm {0.19"} or more
8.5  1 mm {0.33  0.039"}
15 to 1117.6 mm {0.59 to 44"}
0.195 mm {0.0077"}
Outside diameter: 44.1 mm {1.74"}
Maximum 101.6 mm {4.0"}
Printing face must be facing outside.
tion on the die-cut label must be matched.