Media Loading Settings - Epson TM-C3400BK Technical Reference Manual

Media Loading Settings

Sets paper feed movement to the print starting position when turning the printer power on or the
roll paper cover is closed.
The following is the movements to feed the paper to the print starting position when turning the
printer power on or the roll paper cover is closed. (Default setting is [Media Loading Method
(with Cutting)]. The user does not need to set when using with default setting.)
Setting
When either black mark detection or detection of gaps
between labels is set for media position detection, the
top of black mark or the top of label is detected by the
Media Load- black mark detector or the label detector at the
ing Method power-on, and the paper is fed to the print starting
(with Cutting) position.
When no position is detected, the specified amount of
paper is fed. After paper feeding, the printer enters the
stand-by mode with performing autocutting.
When either black mark detection or detection of gaps
between labels is set for media position detection, the
Media top of black mark or the top of label is detected by the
Loading black mark detector or the label detector at the
Method 
power-on, and the paper is fed to the print starting
(without position.
Cutting) When no position is detected, the specified amount of
paper is fed. After paper feeding, the printer enters the
stand-by mode without performing autocutting.
No Media
The printer does not feed the paper to the print starting
Loading
position at power-on.
Method
1
Turn the printer on.
2
Display the printer driver window.
(See How to Use the Printer Driver on page 153
3
Select [Maintenance And Utilities] tab, and click [Media Loading Settings].
108
Specification
for how to display the driver window.)
Roll
paper
Power ON
cover
close
 
 

—