Emptying The Dirty Water Tank - Bissell TURBOCLEAN DUALPRO PET Manual

Emptying the Dirty Water Tank

For helpful how-to videos about maintaining your machine visit support.BISSELL.com.
1.
Pull Dirty Water Tank up
and away to remove.
4.
Clean the red filter below
the Dirty Water Tank by wiping
off any remaining dirt or
debris.
WARNING
electrical outlet before performing maintenance or troubleshooting.
8 BISSELL.com
2.
For quick empty: Pull the
rubber tab (located in the
middle of the tank) and tilt to
pour. When closing the rubber
tab, make sure all edges are
sealed tight.
5.
To replace Dirty Water Tank
angle it by placing the bottom
in first. Then, tilt it toward the
machine and push it until it
"clicks" into place.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
For final clean and rinse:
Unscrew the ring at the bottom
of tank. Gently remove the
float stack, rinse and return to
the tank lining up the arrows
locking into place. Return the
ring and twist to lock.