Related Manuals for Bissell PET HAIR ERASER TURBO 2454 Series
Summary of Contents for Bissell PET HAIR ERASER TURBO 2454 Series
- Page 1 HAIR ERASER ® TURBO LIGHTWEIGHT & POWERFUL PET HAIR PICK UP QUICK START/USER GUIDE 2454 Series More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.com.au...
-
Page 2: Quick Start / Assembly
» Do not plug in your vacuum cleaner UNTIL you are familiar with all instructions and operating procedures. » To reduce the risk of electrical shock, turn power switch off and disconnect plug from electrical outlet BEFORE performing maintenance or troubleshooting checks. www.BISSELL.com.au... -
Page 3: Safety Instructions
Place the Dirt Tank on the vacuum Attach end of hose by securing the to vacuum by sliding bottom in place square cuff into the first, then pushing bracket below the back until you hear power switch. a “click”. www.BISSELL.com.au... -
Page 4: Table Of Contents
Thanks for buying a BISSELL vacuum! We love to clean and we’re excited to share one of our new innovative products with you. We want to make sure your vacuum works as well in five years as it does today, so this guide has tips on using (pages 6-9), maintaining (pages 10-13), and if there is a problem, troubleshooting (page 14). -
Page 5: Product View
On/O Switch Release Button Carry Handle Quick Release™ Pre-Motor Cord Wrap Filter Cover LED Lighted 2-in-1 Crevice Tool Pet Brush Dirt Tank Post-Motor Filter Cover (under Dirt Tank) LED Lights *NOTE: Pet TurboEraser Tool does not store on unit. www.BISSELL.com.au... -
Page 6: Operations
This could include hard wood, tiled floors, small area rugs, or frieze carpets that have long delicate fibers or threads. Adjusting the Suction Control Locate the Suction Control setting on the vacuum handle. Adjust Suction Control for plush carpet or low carpet for easy multi-surface cleaning. www.BISSELL.com.au... - Page 7 Or use the 2-in-1 Pet Brush with When finished, replace the wand back soft, white bristles for sensitive/gentle on the vacuum by sliding into place surfaces and rubber nubs to pick up until you hear “click”. embedded pet hair. www.BISSELL.com.au...
- Page 8 Possible areas that could clog. need servicing. Contact BISSELL Consumer Care. NOTE: The thermal protector controls the main vacuum motor only, not the brush motor. If the thermal protector activates, brush and lights will continue to operate normally;...
- Page 9 Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the Dirt Tank. WARNING Before using your vacuum, make sure that the Dirt Tank is in locked position and that all filters, both pre- and post-filters, are in place. DO NOT operate your vacuum without these filters. www.BISSELL.com.au...
-
Page 10: Maintenance & Care
Remove Pre-Motor Filter from top Pre-Motor Filters to the top of the Dirt Tank, of Dirt Tank lid by pulling out. placing the thick Foam Filter in last. NOTE: Replace filters every 3 to 6 months. Visit BISSELL.com.au for filter replacements. www.BISSELL.com.au... - Page 11 NOT be washed. If dust/debris Twist filter counter-clockwise to accumulates, gently tap the filter on the unlock and remove from vacuum. inside of a trash container. NOTE: Replace filters every 3 to 6 months. Visit BISSELL.com.au for filter replacements. www.BISSELL.com.au...
- Page 12 To put faceplate back on, align the tabs into place. Place Brush Roll with Belt back in the top of the cover and place it down in. Faceplate will not close properly if all to “click” into place. parts are not aligned correctly. www.BISSELL.com.au...
- Page 13 4. Re-attach bottom cover with 10 screws. NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum OFF and unplug from electrical outlet. Remove obstruction and brush will automatically reset when vacuum is plugged and turned back ON. www.BISSELL.com.au...
-
Page 14: Troubleshooting
There is a crack or hole in the If there is a crack or hole, order a new won’t pick Main Hose. Main Hose from the BISSELL website. up dirt Main Hose is not connected. Locate the Main Hose and reconnect by pushing the hose connection. -
Page 15: Guarantee
Limited 2 Year Guarantee INCURRED IN MAKING A CLAIM UNDER THIS GUARANTEE PLEASE (from the date of purchase by PROVIDE BISSELL WITH A COPY OF THE RECEIPT OF THE EXPENSES BY original purchaser) EMAIL OR POST. Subject to the *CONDITIONS identified below, BISSELL will repair or... -
Page 16: Product Registration
©2018 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 161-5513 10/18 Visit our website at: www.BISSELL.com.au...