Table of Contents
Advertisement
11.10 Cancelling a running
programme
1. Press the On/Off
programme and to deactivate the
appliance.
2. Press the On/Off
activate the appliance.
Now, you can set a new washing programme.
If the ProSense phase is already carried
out and the water filling is already
started, the new programme starts
without repeating the ProSense phase.
The water and the detergent are not
drained out in order to avoid waste. The
display shows the maximum duration of
the programme, updating it about 20
minutes after the starting of the new
programme.
11.11 Opening the door - Adding
garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level of the water
in the drum are too high and/or the drum
still rotates you cannot open the door.
You can easily open the door for adding or
removing some items when the icon
lighted on.
1. Touch the Start/Pause
In the display the related door lock indicator
goes off.
2. Open the appliance door. If necessary,
add or remove the items.
3. Close the door and touch the Start/Pause
button.
The programme or the delay start continues.
When the icon
goes off, the door can be
opened when the programme is complete, or
set spinning or draining programme/option
and than press Start/Pause
button to cancel the
button again to
is
button.
button.
11.12 End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active).
In the display all washing phase indicators
become steady and the time area shows .
The indicator of the Start/Pause
goes off.
The door unlocks and the indicator
off.
1. Press the On/Off
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance again,
the display show the end of the last
selected programme. Turn the
programme dial to set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent mildew
and odours.
5. Close the water tap.
11.13 Draining water out after end
of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse, the programme is completed, but:
• The display shows the indicator , the
option indicator
locked indicator
running phase
• The drum still turns at regular intervals to
prevent the creases in the laundry.
• The door stays locked.
• You must drain the water to open the
door:
1. If necessary, touch the Spin button to
decrease the spin speed proposed by the
appliance.
2. Touch the Start/Pause
button
goes
button to deactivate
or
and the door
. The indicator of the
flashes.
button:
ENGLISH
29
Advertisement
Table of Contents
