Table of Contents
Advertisement
We recommend that you keep the
packaging and the transit bolts for any
movement of the appliance.
5.2 Positioning and levelling
1. Install the appliance on a flat hard floor.
Make sure that carpets do not stop the
air circulation below the appliance.
Make sure that the appliance does not
touch the wall or other units.
2. Loosen or tighten the feet to adjust the
level.
WARNING!
Do not put cardboard, wood or equivalent
materials below the appliance feet to
adjust the level.
The appliance must be level and stable.
10
ENGLISH
A correct adjustment of the appliance
level prevents the vibration, noise and
the movement of the appliance when in
operation.
When the appliance is installed on a
plinth or a tumble dryer is stacked on the
washing machine, use the accessories
described in chapter 'Accessories'. Read
carefully the instructions supplied with
the appliance and with the accessory.
5.3 Fixing plate kit
If you install the appliance on a plinth that is
not an accessory supplied by AEG, secure
the appliance with the fixing plates. This
spare part is available in web shop or from
authorised dealer.
Read carefully the instructions supplied with
the accessory.
5.4 The inlet hose
1. Connect the water inlet hose to the back
2. Position it toward left or right depending
x4
of the appliance.
on the position of the water tap.
Advertisement
Table of Contents
