Table of Contents
Advertisement
When the anti-crease movements stop and
the door unlocks, the appliance proposes
again the previous set programme.
A small laundry load helps to reach better
results.
7.8 Extra Rinse
With this option you can add a few rinses to
the selected washing programmes and
optimise the fabric softener distribution and
improve the fabric softness.
It is suggested when you use the fabric
softener.
Useful for people allergic to detergents and in
areas where the water is soft.
This option increases the programme
duration.
The button indicator comes on.
7.9 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly soiled,
it may be advisable to shorten the washing
programme. Touch this button once to
decrease the duration.
• In case of smaller load, touch this button
twice to set an extra quick programme.
In this case, the temperature 95°C is not
selectable.
The led of the button is on and the display
shows the set programme duration.
This option can also be used to shorten
the steam programme duration.
7.10 Stains/Prewash
Press this button repeatedly to activate one of
the two options.
The relevant indicator goes on in the display.
• Stains
Select this option to add an anti-stain
phase to a programme in order to treat
heavily soiled or stained laundry with stain
remover.
Pour the stain remover into compartment
. The stain remover will be added in
the appropriate phase of the washing
programme.
This option is not available with a
temperature lower than 40 °C.
• Prewash
Use this option to add a pre-wash phase
at 30 °C before the washing phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust , mud and other solid particles.
The options can increase the programme
duration.
These two options cannot be set
together.
7.11 Spin
When you set a programme, the appliance
automatically selects the default spin speed.
Touch this button repeatedly to:
• Change the spin speed.
The display shows only the spin
speeds available for the set
programme.
• Activate the Rinse Hold option .
The water of the last rinse is not drained
out to prevent the fabrics from creasing.
The washing programme ends with water
in the drum and the final spin phase is not
performed.
The display shows the indicator
The drum turns regularly to reduce
creasing.
The door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
Touch Start/Pause button
appliance performs the spinning phase
and drains the water.
• Activate the Extra silent option.
.
: the
ENGLISH
17
Advertisement
Table of Contents
