SMC Networks ZL6 Series Operation Manual page 37

•Order of function of setting
Order
1 Selection of display unit
2 Setting of output mode (OUT1)
3 Setting of reversed output (OUT1)
4 Setting of pressure (OUT1)
5 Setting of hysteresis (OUT1)
6 Setting of output mode (OUT2)
7 Supply pilot valve signal ON point
8 Supply pilot valve signal OFF point
Setting of hysteresis (OUT2)
9
Set the range in which the supply pilot valve input is prohibited
10 Setting of response time
11 Setting of display resolution
12 Setting of auto-preset
13 Setting of initialization of fine adjustment of display value
14 Setting of power saving mode
15 Setting of security code
: Return to measurement mode from any setting item by pressing the S button for 2 seconds or longer.
Function
-36-
NO.ZL3-OM00701-A