10Base-T Hub; 100Base-Tx Hub; Hub Without Uplink (Mdi-Ii) Port - TRENDnet TE100-S1212 User Manual

12-port nway 10/100 fast ethernet switch

Hide thumbs Also See for TE100-S1212:

Table of Contents

10/100 Fast Ethernet Switch User's Guide

10Base-T Hub

For a 10 Base-T hub, the Switch LED indicators should illuminate

as follows:

♦ 100M LED speed indicator is OFF.

♦ Link/Act indicator is ON.

♦ FDX/Col indicator is OFF.

For a 100Base-TX hub, the Switch LED indicators should

illuminate as follows:

♦ 100M LED speed indicator is ON.

♦ Link/Act is ON.

♦ FDX/Col LED indicator is OFF.

If a hub is not equipped with an uplink (MDI-II) port, then a

connection can be made using either a straight cable or a crossover

cable (see Appendix A, Technical Specifications for cable

requirements).

Connecting the Switch

Table of Contents