Factory Settings; Software Version - Silvercrest SRH 5 C3 Operating Instructions And Safety Instructions

Factory settings

NOTE
If you reset the device to the factory defaults using the Factory reset func-
►
tion, all stored settings such as stored radio stations, date, time and alarm
times will be deleted .
♦ While in the System menu, press the TUNE+
times if necessary) or turn the VOLUME |
until Factory reset appears on the display
♦ Press the VOLUME |
♦ Press the TUNE+
factory settings) or No (the device is not reset to the factory settings) .
♦ Press the VOLUME |
its factory settings . The message Restarting... appears on the display
The device restarts and then automatically switches to standby mode .

Software version

♦ While in the System menu, press the TUNE+
times if necessary) or turn the VOLUME |
until SW version appears on the display
♦ Press the VOLUME |
version of the device .
■ 36 GB │ IE │ NI
│
ENTER / SCAN dial
or the TUNE−
8
ENTER / SCAN dial
6
ENTER / SCAN dial
ENTER / SCAN dial
or TUNE−
8
ENTER / SCAN dial
.
1
to confirm the selection .
6
button or turn the VOLUME |
7
to select Yes (the device is reset to the
to reset the device to
6
or TUNE−
8
ENTER / SCAN dial
.
1
to display the software
6
button (several
7
6
.
1
button (several
7
6
SRH 5 C3