Automatic Switch-Off (Sleep Function) - Silvercrest SRH 5 C3 Operating Instructions And Safety Instructions

♦ When the nap time has elapsed, an increasingly loud alarm sounds .
NAP flashes on the display
Deactivating the nap timer
♦ When the alarm goes off, press any button to end the timer .
NOTE
► To turn off the timer before the end of the alarm time, call up the NAP func-
tion as described in the section Setting the nap timer . Set the alarm time
to 000 and press the VOLUME |
the selection . The nap timer is now deactivated .

Automatic switch-off (Sleep function)

You can use the sleep function to automatically switch the device off after
10–120 minutes .
♦ During ongoing operation, go to the System menu and press the TUNE+
or TUNE−
♦ Press the VOLUME |
♦ Press the TUNE+
VOLUME |
(Off, 10, 15, 30, 45, 60, 90, 120 minutes) .
♦ Press the VOLUME |
After exiting the system menu, S appears on the right of the display
followed by the remaining minutes or seconds .
♦ After the set time, the device will switch itself off automatically .
♦ To disable the Sleep function, select the setting Off as described above and
press the VOLUME |
■ 26 GB │ IE │ NI
│
1
button (several times if necessary) or turn the VOLUME |
7
ENTER / SCAN dial
6
ENTER / SCAN dial
or TUNE−
8
ENTER / SCAN dial
ENTER / SCAN dial
ENTER / SCAN dial
and the set alarm time is displayed .
ENTER / SCAN dial
until Sleep appears on the display
to confirm the selection .
6
button several times or turn the
7
to select the switch-off time
6
to confirm the selection .
6
to confirm the selection .
6
to confirm
6
8
.
1
1
SRH 5 C3