Table of Contents
Advertisement
The display shows the core tempera-
ture sensor.
4.
Press
or
onds to set the core temperature.
5.
Set the oven function and, if necessa-
ry, the oven temperature.
The appliance calculates an approxi-
mate end time. The end time is differ-
ent for the different quantities of the
9.2 Inserting the accessories
• All accessories have small indentations
at the top of the right and left side to in-
in less than 5 sec-
food, the set oven temperatures (min-
imum 120 °C) and the operating
modes. The appliance calculates the
end time in approximately 30 minutes.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
6.
When the meat is at the set core tem-
perature, an acoustic signal sounds.
The appliance deactivates automati-
cally. Touch a sensor field to stop the
signal.
7.
Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
To change the core temperature,
press
.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and the plug of the core tempera-
ture sensor.
Wire shelf and deep pan together:
The deep pan and the wire shelf have side
edges. These edges and the shape of the
guide-bars are a special device to prevent
the cookware from slipping.
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
crease safety. The indentations are also
anti-tip devices.
ENGLISH
17
Advertisement
Table of Contents
