Table of Contents
Advertisement
Check the rubber cushions are installed in the
correct position before installing the battery.
A: Rubber cushion
B: Battery box
1. Install the battery in the motorcycle.
2. First connect the + lead to the + positive terminal
of the battery.
3. Cover + terminal with rubber boot.
4. Connect the - lead to the - negative terminal of
the battery.
A: + lead
B: - lead
C: Rubber boot
Reinstall the front seat.
Insert the seat hook into the seat hook retainer.
A: Front seat
B: Seat hook
C: Seat hook retainer
Tighten the bolts.
A: Front seat
B: Pin bolt
15
Advertisement
Table of Contents
