Configure The Router - TP-Link TD-W8910G User Manual

3.2 Configure the Router

1. Login to Home Page
To use the web-based utility, launch a suitable web browser and direct it to the IP address of the
Router. Type http://192.168.1.1 in the address bar of the browser.
A dialog box prompts for User name and Password. Type in the default User name admin as well
as Password admin and then click the OK button to access the Quick Setup screen.
Note:
Do not mix up the user name and password with your ADSL account user name and password
which needed for PPP connections.
The default screen shows as below. Change the VPI or VCI values which are used to define
2.
a unique path for your connection. If you have been given specific settings for this to
configuration, type in the correct values assigned by your ISP. Click "Next".
TD-W8910G 54M Wireless ADSL2+ Router User Guide
Figure 3-7
Figure 3-8
11