System Requirements; Installation Environment Requirements - TP-Link TD-W8910G User Manual

Line: Connect to the Modem Port of Splitter or to the telephone line.
Reset Button: There are two ways to reset the Router's factory defaults.
1) Use the Restore Default function on Management -> settings page in the router's
Web-based Utility.
2) Use the Factory Default Reset button: Press the Reset button for more than five seconds
and then wait for the router to reboot.
1, 2, 3, 4 (LAN): Through these ports, you can connect the Router to your PCs and the other
Ethernet network devices.
Power: The Power plug is where you will connect the power adapter.
Antenna: Used for wireless operation and data transmit.
2.4

System Requirements

Make sure your computer has a Networking Interface Card (wired or wireless) before
connecting the Router to your computer.
An operating system supporting the TCP/IP protocol.
Broadband Internet Access (ADSL).
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later.
2.5

Installation Environment Requirements

The Router should not be located where it will be exposed to moisture or excessive heat.
Place the Router in a location where it can be connected to the various devices as well as to a
power source.
Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
Designed to go up to 100 meters indoors and up to 300 meters outdoors for wireless
connection.
The Router can be placed on a shelf or desktop.
TD-W8910G 54M Wireless ADSL2+ Router User Guide
Figure 2-2
4