TP-Link TD-W8910G User Manual page 16

Configure the IP address manually
Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any
value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.168.1.1, DNS address is
the value provided by ISP).
Now, you can run the Ping command in the command prompt to verify the network
connection between your PC and the Router. The following example is in Windows XP
Operating System.
Open a command prompt, From the Start menu on your desktop, select run tab, type cmd/
command in the field, and type ping 192.168.1.1 on the screen that appears, and then press
Enter.
If the result displayed is similar to that shown in figure below, the connection between your PC
and the Router has been established.
TD-W8910G 54M Wireless ADSL2+ Router User Guide
Figure 3-4
9