Table of Contents
Advertisement
4.3.1 Internet
Choose "Interface Setup→Internet" menu, you can configure the parameters for WAN ports in
the next screen (shown in Figure 4-4).
ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path
Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup
8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You
need to activate the VC to take effect. For PVCs management, you can use ATM QoS to
setup each PVC traffic line's priority.
•
Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7.
TD-8817B
ADSL2/2+ Ethernet/USB Router User Guide
Figure 4-4
16
Advertisement
Table of Contents
